• Support 802.11n.
• High performance 5GHz or 2.4GHz 2×2 MIMO wireless module.
• Max transmission throughput: 300Mbps.
• Provide users with a standard wired network signal interface that supports TCP/IP.
• Can be used to develop wireless video related products.

• CC-M0382 Supports low-power USB3.0 interfaces (TBD)①
• Highly integrated WLAN chip system for 2×2 2.4GHz 802.11b/g/n 5GHz 802.11a/n/ac dual-band WLAN applications (dual-band non-concurrent)
• Supports 20MHz, 40MHz and 80MHz (only 5GHz) bandwidths at 2.4GHz and 5GHz frequencies
• Support 2×2 MIMO
• Support 3.3V power supply and 5.0V power supply
• 48 MHz reference clock
• Standard Mini-PCIe package available
• Use external FEM (only 5GHz) to support high output power and better receiver sensitivity
• RF interface: IPEX

Note: ① in the USB2.0 interface verification.

• M0353 Supports low-power USB 2.0 interfaces.
• Provides a highly integrated WLAN system-on-chip (SoC) for 1×1 5 GHz 802.11n/ac WLAN applications.
• Supports a single-ended RF port for cleaner and lower cost design.
• Supports 20 MHz, 40 MHz and 80 MHz at 5 GHz.
• Supports multiuser MIMO.
• Operates on one 3.3-volt power supply and one 5.0-volt power supply.
• 48 MHz reference clock.
• Available in a low-profile 25.0 mm × 25.0 mm solder able package.
• Uses an external FEM to support high output power and rapid sensitivity.
• Radio Interface:1*UFL.

• QCA9886 Single-Band 2×2 MIMO 802.11 a/n/ac WLAN SoC
• CC-M0351 Supports low-power Mini-PCIe1.1 interface.
• Provides a highly integrated WLAN system-on-chip (SoC) for 2×2 5 GHz 802.11n/ac WLAN applications.
• Supports 20 MHz, 40 MHz and 80 MHz at 5 GHz.
• Operates on one 3.3-volt power supply and one 5.0-volt power supply.
• Radio Interface:2*UFL.
• 48 MHz reference clock.
• Available in a standard Mini-PCIe package.
• Uses an external FEM to support high output power and rapid sensitivity.